• Prachi Singh
• Dr Rajeev Jain

: The proneness to implement software programs into the civil engineering industry began as pedagogical concerns for the future as civil engineer. Land surveying, a specialized subdivision of civil engineering, depends heavily on the computerization of the industry. PLAXIS is a program that has been developed specifically for the analysis of deformation, stability, and stress in geotechnical engineering. Shahpur is a town in Burhanpur district in the Indian state of Madhya Pradesh. Shahpur is located at 21.23°N 76.22°E. The land used for study of soil behavior and soil investigation for proposed construction for improvement to water supply services in Nagar Parishad Shahpur, district Burhanpur (MP). The test result obtained from the MNTRL is studied using Plaxis 2D (BENTLEY). The first 9 meters of soil layer consists of Yellowish stiff to hard silty sandy clay, next 11 meters consists of very dense medium coarse grain clayey silty sand with fine gravel. The bore hole terminates at a depth of 20 meters. The modeling of mentioned site is going to be done by Plaxis 2D Software. The FEM analysis of 15 nodes element will be carried out by using Mohr-Coulomb model. The generated mess of borehole will be analysed with different phase condition of staged construction using various soil input parameters provided. The result obtained will be analysed using deformed mess, effective stress, void ratio, plastic points, tension cut-off points and cohesion on different node points of element.

IndexTerms - Borehole, Plaxis 2D, FEM, mess, Element, Phase, staged construction.

"Analysis of soil profile using Plaxis 2D", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 6, page no.1755-1762, June-2020, Available :http://www.jetir.org/papers/JETIR2006581.pdf

"Analysis of soil profile using Plaxis 2D", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 6, page no. pp1755-1762, June-2020, Available at : http://www.jetir.org/papers/JETIR2006581.pdf